HS-20 High Security Display Counter

HS-20 Standards

• All displays have an ultra high LED light strip at the front top edge and both vertical front edges.

• The lock on the employee side is immediately above the sliding steel doors, providing more user-friendly and ergonomic employee access.

• Doors ride on ball bearings for smoother operation.

• Within the toe kick are four levelers and floor mounts. The display can be fastened to the floor.

• The customer side clear face is 1/4” polycarbonate covered in 1/4” tempered glass.

• The top clear panel is 1/4" tempered glass on top of 1/4" polycarbonate. The glass provides an excellent surface for showing product.

• The front and top are made of one formed polycarbonate panel, the single panel construction eliminating any joint/seam.

• Fully welded outside frame and doors are 11ga steel. Welded internal frame is 1” x 11ga steel square tube.

• The lock is an interchangeable core style lock body ready to accept your dual barrel lock core.

• The display floor area is made from white textured ABS plastic over a steel sheet.

• Doors, bottom door track, and shelf brackets are powder coated white to set off product.

• All displays are UL listed.

• Each display has a 24v power transformer in the toe kick and can be linked together for single on/off operation.

• Three full depth 16" deep 1/4” tempered glass shelves are included with each display.

• Base is all steel with removeable toe kick covers.

• Dimensions are 48” wide by 44” high and 22” deep.

• It weighs 400 pounds.